(Images showed above are for illustration purpose)

An aquarium operator in Singapore asked Winston Engineering to inspect a DAB NOVA 200 submersible pump that had stopped running. Our technicians found debris and a foreign object inside the impeller cover. The motor also had water inside it, and cleaning alone would not have fixed that.

What did our technicians find when they dismantled the pump?

The first sign of trouble was inside the impeller cover. Our technicians found debris and a foreign object there. This kind of blockage can stop a pump, so it looked like the obvious cause.

Would removing the debris have got the pump running again?

No. When we opened the motor housing, we found water inside. The motor winding had burned out, and water had damaged other internal parts. Clearing the impeller cover would have left the operator with a pump that still could not run.

How did water get inside the motor?

We suspect water entered through a damaged seal. We could see the damage the water had caused, but we could not confirm exactly where it got in.

What did our service team recommend?

We recommended replacing all damaged parts before putting the pump back into service. Dismantling the unit gave the operator a clear picture of the work needed. What first looked like debris around the impeller also involved damage inside the motor.

What can pump operators take from this case?

  • A blockage may not be the only fault. A pump that stops running can have more than one problem. A full inspection shows whether a visible blockage is the whole story.
  • Check the motor as well as the wet end. Water inside the motor housing can damage the winding and other internal parts, even when the impeller cover is the first thing you see.
  • Have a technician assess it before restarting. Restarting a pump with a damaged motor can make the damage worse. Isolate the power first and book an inspection.

Need a pump inspection in Singapore?

If your submersible pump has stopped running, send our service team the model and a description of the fault. We will help you work out what needs to be done. Enquire about pump servicing

 

FAQ

Would cleaning the impeller have got this pump running again?

No. We found debris and a foreign object inside the impeller cover, but the motor winding had also burned out. Clearing the debris would still have left the motor damage to deal with

How did water get inside the pump motor?

We found water inside the motor and suspected it had entered through a damaged seal. We couldn’t confirm the exact entry point during the inspection.

What did Winston Engineering recommend replacing?

We recommended replacing all damaged parts, including the burned motor winding and the other internal components affected by water. That recommendation was based on what we found after dismantling this particular pump.

Javier
Author Bio

Javier

Linkedin Profile

Javier is a Marketing Executive at Winston Engineering with a strong foundation in digital marketing, content creation, and SEO. Holding a Bachelor's degree in Marketing from UTAR, he brings a blend of creative and analytical skills to the team, managing everything from social media and Google Ads to video production and website content. Javier's expertise spans Adobe Illustrator, Adobe Premiere Pro, Google Analytics, and CMS platforms, making him a versatile contributor to Winston Engineering's growing digital presence across the region.

See all posts by Javier »